The grinding equipment has been used for a long time, the machine needs maintenance, and some misoperations have caused the operation of the grinding equipment to cause abnormal operation due to the operator not using the grinding equipment
Micro Powder Vertical Roller Mill are generally used in the grinding of mineral products in the fields of metallurgy, building materials, chemicals, and mining. According to the fineness of the material to be milled and the fineness of the material to be discharged, the mill can be divided into coarse powder mill, high pressure suspension roller mill, high pressure micro powder mill, straight-through centrifugal mill, and three-ring medium speed. Mills of six types of mills. For each type of milling equipment, the after-sales staff will explain the operation details to the operator. A small amount of data is not adjusted, which will lead to serious consequences. The grinding equipment has been used for a long time, the machine needs maintenance, and some misoperations have caused the operation of the grinding equipment to cause abnormal operation due to the operator not using the grinding equipment correctly. So the following is mainly to talk about the precautions of the micro powder vertical roller mill.
Micro Powder Vertical Roller Mill Precautions
1. During the operation of the machine, if abnormal sound is found or the current of the host suddenly rises and it cannot be lowered for a long time, it should be stopped immediately.
2. The feed size should be uniform, the speed should be appropriate, too slow will reduce the output, too fast will block the air duct, the machine can not work, and even cause serious accidents.
3. The speed of the feed rate can be adjusted according to the rise and fall of the main motor current;
4. The material that enters the main machine grinding should be in the form of a block. If there is more powder in the powder or in the block, the output of the mill will be reduced;
5. The grader motor is a motor with variable frequency speed regulation, and its controller variable frequency knob can be used to obtain different grader speeds. The higher the speed, the finer the finished product size;
6. Check the bearing frequently. If the temperature rise exceeds 80 °C or there is abnormal noise, stop it and check it;
7. The newly installed unit should first be tested experimentally to check the accuracy and reliability of the installation. The empty machine test machine should not exceed two minutes. Stop the inspection to check the flexibility of each part, whether there is overheating or bolts. Whether it is loose, the vibration of the main machine is too large, the production can be fed after the adjustment, and the above items will be stopped after one hour. If there is no problem, it can be transferred to normal production.
The micro powder vertical roller mill is a revolutionary new pendulum mill based on the traditional ultra-fine mill after many years of practice and continuous innovation and improvement. If you have any questions about the mill or are interested in our mill, please feel free to contact us.
